Sabre Cold Galv Zinc Rich800ml

Stock Code: 100000159838

Descriptions

Delivery of this product is only available to the following postcodes beginning with: E, N, NW, IG, EN, AL, SS, CM, SG, CB, CO, IP, NR, PE

Collection is available from our depots

At a glance

Quick drying
Protection for steel substrates
Ideal for repairs to galvanised substrates
Available in matt grey or silver grey

Intended Uses

Single pack sacrificial primer for steel. Excellent anticorrosive properties, dry film contains upto 95% Zinc by weight. Conforms to BS 4652 Type 2

Details

Colour

Available in matt grey or silver grey.

Gloss Level

Matt

Volume Solids

Nominally 42%, varying slightly with colour.

Recommended Film thickness

Typical dry film thickness when applied is 40 microns.

Theoretical Coverage

Approx 10.5 square metres per litre at 40 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.

Method of Application

150:006 is best applied by airless or conventional spray or brush.

Drying Time

Touch Dry …… 15 minutes.
Handle dry ….. 2 hours.
Full Cure …….. 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.

CLICK HERE FOR SABRE COLD GALV ZINC RICH PRIMER (ALL FINISHES) TECHNICAL DATA SHEET

CLICK HERE FOR SABRE COLD GALV ZINC RICH PRIMER MATT GREY SAFETY DATA SHEET

CLICK HERE FOR SABRE COLD GALV ZINC RICH PRIMER SILVER GREY SAFETY DATA SHEET

CLICK HERE FOR SABRE COLD GALV ZINC RICH PRIMER AEROSOL SILVER GREY SAFETY DATA SHEET