IABCO ER80S-Ni2 2.4mm Low Alloy TIG Wire

Stock Code: 100000086459

A minimum order quantity of 5 applies to this product.

This product must be ordered in multiples of 5, quantities will be rounded up as you add them.

Descriptions

We currently have 50 kg to clear against above price

IABCO ER80S-Ni2 2.4mm TIG/GTAW wire for low alloy steel

Product name	IABCO ER80S-Ni2 TIG
Classification EN ISO	636-A: W 2Ni2 / W 42 9 W2Ni2
Material No.	-
Classification AWS	A5.28: ER80S-Ni2
Approvals	TÜV 12694.01, CE.
Applications	TIG/GTAW rod for welding steels where impact properties are required at -75°C. Applications include structural, oil & gas and offshore steelwork
Base materials	For cryogenic construction steels and Ni bearing low temperature steels. ASTM: A203 grade A/B, A333/A334 grades 1/6/7, A350 grade LF2/LF5/LF6, A352 grade LC1/LC2. 11MnNi5-3, 13MnNi6-3, 15NiMn6, S275NL-S460NL, S275ML-S460ML, P275NL2-P460NL2, P355ML2-P460ML2.
Typical analysis of wire, weight %	C: 0.09 Si: 0.52 Mn: 1.10 Ni: 2.45
Typical heat treatment (1)	Preheat and PWHT are often not necessary but actual requirements will depend on the grade and thickness of material being welded and any design codes that apply.
Typical mechanical properties of weld (2)	0.2% proof stress Rp0.2%: ≥470MPa. Tensile strength Rm: ≥550MPa. Elongation 4d/5d: ≥24/20%. Impact ISO-V, -90°C: ≥47J.
Other products	SAW: S2Ni2. MIG/GMAW: ER80S-Ni2.

Notes

(1) Application codes and project specifications should always be referred to for specific requirements.
(2) Actual mechanical properties will be dependent on specific welding procedure (including shielding gas, flux, PWHT etc) and should always be confirmed by approval of an appropriate welding procedure.