Binzel ABICLEANER 1000 AC/DC Cleaning & Polishing Set 110V 192.0375.1

Binzel ABICLEANER 1000 AC/DC Cleaning & Polishing Set 110V 192.0375.1

Complete with:

• ABICLEANER handle with 10mm² cable, 4mtr 
• PTFE sleeve
• ABIBRUSH carbon fibre brus
• Earth clamp with 10mm² cable 4mtr
• Combination spanner SW10
• ABICLEAN all-in-one electrolyte 1ltr
• Spray bottle for water
• Wide-necked container with blue lid
• Acid proof plastic box

Where the look simply inspires the ABICLEANER 1000 can readily be described as a multi-talent not only for cleaning welded surfaces, but also for special applications such as polishing, levelling or brightening surfaces. Removing tarnish and restoring the corrosion layer is completed with this device by the fact that it also creates a visually very appealing surface. Its range of application extends from locksmiths building a shapely railing, for example, to the medical sector, where surfaces need to be polished..

The benefits at a glance

• Gentle on the surface – facilitated by the carbon fibre brush made of over 1.5 million filaments
• Fast & effective –due to the electro chemical effect
• Safe–free of hydrofluoric acid
• Simple–ABICLEAN all-in-one electrolyte
• Powerful–professional units with 100% duty cycle at full power rating

Where conventional, abrasive grinding techniques or conventional pickling techniques very quickly reach their limits, the ABICLEANER is the gentle and fast solution.

In contrast to classic cleaning products such as pickling pastes, abrasives, brushes, fleece or emery, electrochemical surface cleaning with the ABICLEANER does not leave any unsightly grinding or pickling marks on the workpiece.

In addition, with the help of the millions of filaments of the carbon fibre brush, hard-to-reach places such as the inner seams of railings can be reached effortlessly and thus cleaned after welding without leaving any residues – and all this with 80 amps at 100% duty cycle.

When appearance is also important

In many industrial production processes, tarnish is undesirable because the appearance matters – this is where the ABICLEANER can prove its skills. Especially when welding stainless steel, so-called tarnish colours are produced, which do not look very nice on railings, facades, switch cabinets etc. and ideally have to be removed again gently. The use of pickling pastes or other abrasives and grinding tools is highly toxic on the one hand and leaves unsightly marks on the sensitive stainless steel surface on the other. Anyone who has ever tried to clean an extractor hood in the kitchen, for example, with a felt sponge and scouring agent, will be familiar with these unsightly scratch marks on the surface.

With the ABICLEANER, even delicate surface structures such as waffle patterns are not changed and retain their original appearance.

In addition to the gentle cleaning of the surface, which is conducted with a hydrofluoric acid-free solution, the ABICLEANER also has the property of restoring corrosion resistance after mechanical, chemical and thermal treatments. Stainless steel forms a layer of chromium oxide for protection, as the chromium in the stainless steel combines with oxygen and hydrogen from the environment, making the metal resistant to corrosion. After cleaning the weld seam surface with the ABICLEANER, the precious metal is also directly protected against corrosion again; this is also referred to as having been passivated.

The process: Electrochemical cleaning

Electrochemical cleaning uses micro-arcs to remove welding residues from metal surfaces after welding and passivate them at the same time. For this purpose, a carbon fibre brush wetted with electrolyte, at the ends of which more than one million small arcs are generated, is moved over the workpiece surface.

The carbon fibre principle in combination with the powerful equipment technology in the ABICLEANER is a reliable electrochemical cleaning process for all industrial applications or welding seams.

CLICK HERE FOR FULL PRODUCT DETAILS